The Kind Of Flying Excitement With The Blade 120 SR
The Blade 120 SR is an ideal choice for everyone who wants to advance up from a coaxial RC helicopter, but does not want the difficulty with a collective pitch, stunt heli. A true hobby-grade helicopter with fully replaceable parts, each 120 SR is test flown prior to packaging in order that everything is set-up sufficiently. At just over a foot in length, the Blade 120 SR is large enough that can be flown outdoors, yet small enough to fly inside as well during poor flying weather. This unique design creates almost as much stability as a coaxial helicopter with twin, counter-rotating main rotors, but is still hard to flip upside down and power into the ground. The fixed pitch single rotor is perfect for intermediate pilots who desire a challenge prior to moving on to a collective pitch model. Though this is relatively small and fixed pitch, it is not advisable for beginning fliers, even those having previous RC airplane experience. Flying an RC heli is very different from flying an RC plane. Anyone who does go with a 120 SR as a first helicopter should be sure you fly it inside several times to get a feel for the controls before presenting environmental factors, such as wind. The Blade 120 SR combines all the newest RC technology into a well-crafted machine. It uses a LiPo battery, which is better than traditional alkaline and lead based batteries. Alkaline batteries only output their peak power for a short time. Then, the power output steadily declines until the battery dies. A LiPo, or lithium-polymer, battery continuously puts out its maximum power. LiPos are also small, making them light and excellent for RC helis. The 120 SR also features a factory installed, 5-in-1 control unit with a 2.4 gigahertz radio system, which is superior to traditional AM/FM radios. The Spektrum 2.4 GHz radio system operates with constant channel hopping technology that eliminates interference as well as providing a longer range than older radios. Individuals who already own a Spektrum transmitter can buy the bind and fly (BNF) model of the helicopter that comes with a receiver, which lowers price of the heli. Those without a Spektrum transmitter can buy the ready to fly (RTF) model that comes complete with everything. The 120 SR also comes fully equipped with a gyro for increased flight stability. Additional hop-ups are offered, for example carbon fiber parts that are stronger than the factory plastic and aluminum parts. Anyone interested in the carbon fiber parts really needs to be careful, though. While a few carbon fiber parts are fine to use, it is inadvisable to replace everything with carbon fiber. Some of the heli’s parts are made to be the point of least resistance and snap under stress. When these small, low priced parts cannot break, the motor can burn out. However, even the motor on the 120 SR is completely replaceable. The Blade 120 SR is a fantastic choice for anyone wanting to get serious about RC helicopters. When the RTF version is purchased, nothing at all is required to complete the helicopter. It even includes a battery charger. Because every single part is replaceable, it can be repaired after even the most serious crashes. Blade owners can also make use of the helicopter help line if they need assistance flying or with repairs. For challenging, high-flying fun indoors or out, ?choose the? Blade 120 SR.
I’ve found much more information for you about the blade 120 sr. For that, and offers and special discounts, take a look at http://rcrtfhelicopter.com/ – you’ll be happy you did.
Processing your request, Please wait....
