Checking Fuses and Circuit Breakers
Every house has an electrical switchboard. It protects the electrical wiring system at home. As part of your home maintenance checks or when doing your next renovations, have a look in your switchboard. This is where the main power switch, along with a number of fuses, or circuit breakers are situated. Each fuse or circuit breaker connects to an alternative area of wiring in your home. Automobile electrical fault accurse, the fuse will blow or even the circuit breaker will trip, reducing the power preventing overloading or household fire. A circuit breaker can be switched back on, whereas once a fuse blows it must be substituted with a new one.
Always turn off the primary power switch if you are changing a fuse and also turning off all electrical appliances and lightweight switches that are connected to the blown fuse. Replace the fuse with all the correct current rating. Too big a current rating will cause excessive current circulation through the circuit. Overheating and perchance fire can occur.
If a fuse keeps blowing, obtain one of the many licensed Auckland electricians. There could possibly be hidden electrical problems that you simply won’t have picked up. If possible, swap the fuses inside your switchboard with plug-in circuit breakers of the same rating, as these are safer to use and require replacing.
Find out what electrical switches and appliances the fuse or circuit breaker protects. Switchboards are usually labelled for easy identification. Or even, ask an electrician to do this available for you. This can save you time in identifying a blown fuse or which circuit breaker to change off.
How to Replace a Fuse
Abide by these steps:
1. Turn off the main power switch at the switchboard.
2. Look inside switchboard for a list of where each circuits each fuse connects to.
3. If it is not obvious which fuse has blown, inspect each fuse one at a time.
4. Once you have found the blown fuse, pull the plug on lights and unplug all appliances on that circuit.
Replace the fuse wire. Make sure you use the correct current rating fuse wire. The present rating is generally indicated around the front of the fuse carrier.
Lighting circuits typically use 5 amp, but not greater than 10 amp fuse wire.
Socket outlets use 10 amp yet not greater than 15 amp fuse wire.
Large appliances employ a larger size fuse.
Always cut off any excess fuse wire.
5. Placed the fuse back in its slot and turn back on the main power switch.
6. In the event the fuse blows again, call an accredited electrician.
What to do if a Circuit Breaker Trips?
Should your power goes off because your circuit breaker has tripped adopt these measures:
1. Switch off lights and unplug all appliances for the faulty circuit.
2. Push the operating lever for the “on” position, or push from the button on the circuit breaker.
3. Should the circuit breaker continues to trip, it is time to get hold of one of the many licensed Auckland electricians.
For more information about fuse please visit our website.
Processing your request, Please wait....
