Lighting in the application of energy-saving control of one cabinet
One cabinet lights Energy Saving Control
DR.LIGHT street lamp controller cabinet with lights from the street light control cabinet Saver combination of street lamp controller of new products, energy saving lights and lamps with intelligent control of dual function. It uses advanced electromagnetic voltage regulator technology, the dynamic adjustment of street lighting circuit of the input voltage and current, so that lighting work in the best voltage, current conditions, reducing the additional power consumption of the lamp to achieve energy saving and optimization of power supply purposes; also use Time control switch or the celestial clock with a combination of the main switch off time control of street lamps, street light control function to achieve. If the Power Saver failure, the system can automatically or manually switch to bypass the system without affecting the normal power supply. DR.LIGHT street lamp controller cabinet for the time-control and power requirements of lamps and similar lighting, new street lighting system, and the transformation of the existing street system energy saving. This product can be as high as 25% saving rate of -40%, while reducing harmful glare of the naked eye. Street lighting systems commonly used in high-pressure mercury lamp, high pressure sodium lamp, metal halogen lamps, fluorescent lamps, etc. are applicable to this product.
DR.LIGHT saving lamp energy saving control cabinet principle and basic components:
Gas discharge lamps start classes often need to be achieved in the frequency voltage, when they are started after normal working hours, the lamp gas within the medium category also will be activated until the lamp normal light, then if a certain percentage of lower input power to its power supply, not only will not have much control degree of influence, but also effectively extend the lamp life. According to a large number of experimental results showed that each 10% lower supply voltage, the conventional lighting such as fluorescent illumination of about 7% lower, while the human eye to light perception and illumination logarithmic relationship, that when the light intensity decreased 10%, in theory human perception brightness is only reduced by 1%, and a suitable lighting to reduce the input power generated by weak illumination changes will not affect normal use, but can be extended lamp life is 70%. City street lighting system required a certain time every day after sunset street lamp control system for automatic opening, daylight control system shut down automatically after the street lights, street lamps when required achieving lights, lights off when not required, some street lighting system required after midnight part of the street normally open, some lights off, to achieve macro-saving requirements. The main route back to a special energy saving coil of an output current is continuous, non-harmonic disturbances on the grid, adaptive capacity, flexible real-time response parameters of a one-time adjustment adjust the output.
According to the characteristics of the city street system, the company developed a DR.LIGHT street lamp controller cabinet. DR.LIGHT street lamp controller cabinet is an advanced and intelligent street light street light control system combined with electricity saving for urban street systems of special equipment, energy-saving control is the use of microelectronics technology control electromagnetic surge, constantly monitor the voltage change dynamic adjustment of street lighting circuit the input voltage and current, so that the work in the best lighting conditions, reducing the additional power consumption of the lamp to achieve energy saving and optimization of power supply purposes; use of the time control switch or the celestial clock with a combination of the main switch control lamp switch time, to achieve lamp switch, control and protection. It consists of intelligent lighting energy saving lamp system, the main switch, meter, contactor, fuse, when the control switch or celestial clock, chassis, control panels, membrane switch or knob switch, electromagnetic control devices and other components. It is a system of energy saving lamps and control for the new low-voltage electrical equipment, no harmonic interference, reducing the installation space, reduce construction time and reduce the project cost so important.
DR.LIGHT lamp control unit of the main application
Municipal lighting?? Public roads, tunnels, bridges urban roads high pressure sodium, low pressure sodium lamp, metal halide lamps, high pressure mercury lamp, fluorescent lamps and other lighting at night continuous operation.
I am Chinese Manufacturers writer, reports some information about quality wind chimes , fish wind chime.
Processing your request, Please wait....
