And "burn oil" bye time to distinguish the two phenomena – oil, conser
We all know that "burn oil" on the vehicle damage is very large, not too fast will damage the oxygen sensor vehicles, leading to increased combustion of coke, idle speed unstable, weak acceleration, increased fuel consumption, excessive emissions and other undesirable consequences of lack of serious engine lubrication, making the engine difficult to repair the damage or even scrapped, resulting in significantly higher maintenance costs even in the presence of potential hazards. But for ordinary owners, how to identify the existence of car "burn oil" mean?
Phenomena and detection methods to identify
A phenomenon: Burning oil is mainly from the rear while driving a blue tail, which means that too much oil into the combustion chamber to participate.
Two phenomena: oil-foot detect excessive oil consumption. For example, vehicles for three months / 1,000 km, the oil from the normal point scale down to a minimum the following scale.
Detection method: 1. The early morning cool car starts, see Exhaust Will take blue smoke.
2. In vehicles or in situ pedal to the metal, the exhaust pipe is a large number of blue smoke emitted.
3. In addition to the exhaust pipe, oil I also take blue smoke from time to time.
Expert analysis Because the valve seal of aging and wear and tear after prolonged use serious, have been unable to achieve a good sealing effect, so some of the useful life longer or higher mileage vehicles more prone to burn oil phenomenon. The selection was detected in the early morning cool car because the engine is not running a long time, oil will be under the influence of gravity through a gap into the cylinder valve seals. 1 Start the engine, the cylinder of the engine oil will be under the effect of high temperature and pressure in the combustion of a large number of blue smoke. The pedal to the metal detection methods, mainly to check the engine piston rings with the cylinder wall exists between the Mifengbuyan. Vehicles in hard acceleration, the piston moves up and down frequency speed, cylinder wall remnant Lubricating oil Piston rings into the combustion chamber easily, leading to burning oil. If in any case, have blue smoke emitting from the exhaust pipe, but I also occasionally emitting blue smoke oil, is indicative of engine wear is quite serious, and vehicle repair needs in a timely manner, otherwise it will cause serious accidents.
Maintenance Tips Car's oil has many effects on the protection of critical engine. When the oil circulation inside the engine, movement of parts in the working surface of friction between the film, not only to achieve lubrication protection, lower power consumption, reducing mechanical wear and can also play a role and increase the heat seal. At the same time, a good clean oil dispersion, but can break up clay molecules, eliminating the role of carbon deposit cleaning. Although the "burn oil" will bring great troubles, but the oil in the engine also has some consumption, as long as the consumption value within a certain range, it is normal. Many reasons lead to burning oil, volatile oil, engine running, engine type and so may cause the engine burning oil, but by strengthening the routine car maintenance can reduce and avoid the risk.
1. Owners should develop good habits inspection. Should be used according to different conditions in the normal routine daily maintenance of their own to have regular check oil, such as the oil surface than the lower limit should be added in time. Miles long and useful life and often in harsh conditions, the frequency of inspections of vehicles used to increase accordingly. This occurs even if the vehicles burn oil situation, it could do, "early detection and early treatment" to reduce maintenance costs.
2. Use good quality gasoline. Gasoline Additive Colloidal substances in Oxidation occurs after Nozzle Into the combustion chamber after combustion, will be the intake valve, piston, piston ring groove, the combustion chamber, Spark Plug And other parts of the formation of coke, and coke increased aging of these areas, causing burn oil.
3. Be able to do regular maintenance of vehicles. Vehicle maintenance cycle of development is based on Car The development of normal driving conditions, such as the use of relatively poor conditions of vehicles, according to the actual situation and requirements should be shortened maintenance cycle of laps. Typically, the maintenance cycle is 5000 km, while every care needs to replace oil and oil filter.
We are high quality suppliers, our products such as GLOBAL Customers Projects Manufacturer , Motion Theater Chair for oversee buyer. To know more, please visits 3D Cinema System.
Processing your request, Please wait....
