Chloralkali Process

Procedures

There are two production methods in use. While the mercury cell method produces chlorine free sodium hydroxide the use of several tonnes of mercury leads to serious environmental problems. In normal production cycle a few hundred pounds of mercury per year are emitted which accumulate in the environment. Additionally, the chlorine and sodium hydroxide produced via the mercury-cell chloralkali process are themselves contaminated with trace amounts of mercury. The membrane and diaphragm method use no mercury, but the sodium hydroxide contains chlorine which has to be removed.

Membrane cell

Basic membrane cell used in the electrolysis of brine.

The most common chloralkali process involves the electrolysis of aqueous sodium chloride (a brine) in a membrane cell.

Saturated brine is passed into the first chamber of the cell where the chloride ions are oxidised at the anode to chlorine:

2Cl Cl2 + 2e

At the cathode, hydrogen in the water is reduced to hydrogen gas, releasing hydroxide ions into the solution:

2H2O + 2e H2 + 2OH

The non-permeable ion exchange membrane at the center of the cell allows the sodium ions (Na+) to pass to the second chamber where they react with the hydroxide ions to produce caustic soda (NaOH). The overall reaction for the electrolysis of brine is thus:

2NaCl + 2H2O Cl2 + H2 + 2NaOH

A membrane cell is used to prevent the reaction between the chlorine and hydroxide ions. If this reaction were to occur the chlorine would be disproportionated to form chloride and hypochlorite ions:

Cl2 + 2OH Cl + ClO + H2O

At higher temperatures, 333K, chlorate can be formed:

3Cl2 + 6OH 5Cl + ClO3 + 3H2O

Because of the corrosive nature of the chlorine produced, the anode has to be made from a non-reactive metal such as titanium, whereas the cathode can be made from Nickel.

In the membrane cell, the anode and cathode are separated by an ion-permeable membrane. Saturated brine is fed to the compartment with the anode (the anolyte). A DC current is passed through the cell and the NaCl splits into its constituent components. The membrane passes Na+ ions to the cathode compartment (catholyte), where it forms sodium hydroxide in solution. The membrane allows only positive ions to pass through to prevent the chlorine from mixing with the sodium hydroxide. The chloride ions are oxidised to chlorine gas at the anode, which is collected, purified and stored. Hydrogen gas and Hydroxide ions are formed at the cathode.

Diaphragm cell

Main article: Manufacture of Sodium hydroxide by Nelson’s process

In the diaphragm cell process, there are two compartments separated by a permeable diaphragm, often made of asbestos fibers. Brine is introduced into the anode compartment and flows into the cathode compartment. Similarly to the Membrane Cell, chloride ions are oxidized at the anode to produce chlorine, and at the cathode, water is split into caustic soda and hydrogen. The diaphragm prevents the reaction of the caustic soda with the chlorine. A diluted caustic brine leaves the cell. The caustic soda must usually be concentrated to 50% and the salt removed. This is done using an evaporative process with about three tonnes of steam per tonne of caustic soda. The salt separated from the caustic brine can be used to saturate diluted brine. The chlorine contains oxygen and must often be purified by liquefaction and evaporation.

Mercury cell

Main article: Castner-Kellner process

In the mercury-cell process, also known as the Castner-Kellner process, a saturated brine solution floats on top of the cathode which is a thin layer of mercury. Chlorine is produced at the anode, and sodium is produced at the cathode where it forms a sodium-mercury amalgam with the mercury. The amalgam is continuously drawn out of the cell and reacted with water which decomposes the amalgam into sodium hydroxide and mercury. The mercury is recycled into the electrolytic cell. Mercury cells are being phased out due to concerns about mercury poisoning from mercury cell pollution such as occurred in Canada (see Ontario Minamata disease) and Japan (see Minamata disease).

Manufacturer Associations

The interests of chloralkali product manufacturers are represented at regional, national and international levels by associations such as Euro Chlor and The World Chlorine Council.

In the Laboratory

Electrolysis can be done with two beakers, one containing a brine and one containing pure water. A salt bridge can be make of a length of bent hose (don’t use metal pipe) to connect the two beakers. Plug the ends with tissue or cloth. Put any electrode in the solution that you want to produce sodium hydroxide and hydrogen with. Put an electrode made from a carbon rod (or a pencil lead) into the solution that you want to produce the chlorine gas. If you want the hydrochloric and hypochlorous acid from the chlorine dissolution, put its electrode in the pure water solution. If you want the sodium hydroxide and hydrogen gas, put its electrode into the pure water solution. Connect the “any” electrode to the negative terminal of a 12 volt power supply.

See also

Gas diffusion electrode

External links

Chloralkali Electrolysis (Archived 2009-10-31)

Encyclopedia article

v  d  e

Articles related to electrolysis

Principles of electrolysis

Electrochemical cell  Electrolytic process  Faraday’s laws of electrolysis  Half cell  High-temperature electrolysis  High pressure electrolysis  Regenerative fuel cell  Solid oxide electrolyser cell  Unitized regenerative fuel cell  Standard electrode potential

Electrolytic processes

Betts electrolytic process  Castner process  Castner-Kellner process  Chloralkali process  Downs cell  Electrolysis of water  Electrowinning  Hall-Hroult process  Hofmann voltameter  Kolbe electrolysis

Materials produced by electrolysis

Aluminium (extraction)  Calcium metal  Chlorine  Copper  Electrolysed water  Fluorine  Hydrogen  Lithium metal  Magnesium  Potassium metal  Sodium metal  Sodium hydroxide  Zinc

See also

Electrochemistry  Gas cracker  Standard electrode potential (data page)

Categories: Chemical processes | Unit processes | Electrolysis

I am a professional writer from Frbiz Site, which contains a great deal of information about canon optura 50 , canon eos digital rebel 300d, welcome to visit!

Processing your request, Please wait....

Leave a Reply